Viking Pump, Inc.

The Abrasive Liquid series pumps are designed to maximize pump life handling paints, inks, waste oil, and other abrasive liquids. With tungsten carbide bearings and silicon carbide behind-the-rotor mechanical seals, as well as other hard materials of construction, these pumps have doubled and...

The LVP Series vane pump sets the benchmark for durability with its standard, stainless steel casing surface-hardened to 62 Rockwell C maximizing casing and vane life. Its hardened chrome oxide coated shaft turns in a hard silicon carbide bearing, providing industry leading pressure capabilities to...

Vane pumps are used for liquid transfer applications from chemicals to liquefied gases. Vanes extend from slots in the rotor, sweeping liquid through a cam-shaped cavity. The vanes provide very low slip and high volumetric efficiency.

Viking Pump offers a variety of hydraulic pumps and accessories for fluid power applications. Based on the external gear pumping principle, except with tighter clearances than industrial duty external gear pumps, they are capable of discharge pressures to 3,000 psi.

Designed exclusively to handle ammonia and other low vapor pressure fluids in both refrigeration and transfer applications, these pumps are operated at low speeds to minimize flashing. They feature double mechanical seals with pressurized seal chamber and oil reservoir to prevent release of gas to...

The Viking Universal Mag Drive Pump (UMD) combines many of the benefits of the Universal Seal Series, but in a sealless design. This eliminates the hazards and mess caused by packing or mechanical seal failure, making this an ideal solution for: Hazardous liquids such as casutics or acidsFlammable...

Viking's Spur Gear series pumps are ideal for low-capacity, high-pressure, motor-speed applications. All pumps increase by capacities of 40%, so there is always a pump within 20% of your capacity needs. Viking Mag Drive® Pumps use magnetic force passing through a statically sealed canister to...

The Industrial Lobe Series pumps are designed to handle fluids of nearly any viscosity, especially shear sensitive materials, at higher pressures than an internal gear pump or a standard lobe pump is capable of. The high pressure option uses a patented shaft support system with bushings on both...

Rotary lobe pumps use timing gears to eliminate contact between the rotors, which allows their use on non-lubricating liquid. Various rotor forms are available, including bi-wing (shown at left) and multi-lobe options. These pumps offer low shear and gentle handling of the liquid to minimize...

Viking Pump offers a wide selection of fixed displacement, high speed hydraulic motors for driving pumps and other equipment at speeds from 500 to 4000 RPM. Needle bearings and high strength gears assure efficient performance and extended service life. Motors are available with either USA 4F17...